TECNOCOAT P-2049 This is a two-component spray membrane created on the basis of pure polyurea. This product is:
- harmless to the environment,
- waterproof,
- protects against corrosion,
- adheres perfectly to the substrate,
- very easy to clean,
- free joints,
- dries within 4 seconds.
TECNOCOAT P-2049 is extremely durable, and the resulting coating is resistant to chemicals, weathering, protects against bacterial growth. Thanks to the excellent adhesion to most substrates, can be a safe and durable surface with anti-slip, will not rust.
System Properties:
- uniform layer thickness 2 mm, rozciągliwości the 600%,
- dries within 4 seconds, and the surface is ready for use after 24 hours,
- ideally suited for coating surfaces with irregular form,
- excellent adhesion to any surface,
- hydroodporny,
- the system is very robust,
- abrasion,
- UV,
- resistant to chemicals,
- resistant to weathering,
- a very large temperature range: -40 ºC do +180 ºC,
- solvent-free,
- approved for contact with potable water.
Applications TECNOCOAT P-2049:
- waterproofing surface,
- protective coating of structural elements, regardless of the form,
- roofing,
- terraces,
- a coating stainless steel,
- sealing tanks,
- floor parking,
- Industrial Floors,
- foundations located under the ground level,
- elements of garden architecture,
- disposal plants,
- power,
- wastewater treatment plants,
- non-slip flooring,
- fire protection design, walls.
TECNOCOAT P-2049 has the following certificates and approvals:
- Approved ETA – EUROPEAN TECHNICAL APPROVAL – download
- Certificate issued by the Applus, stating the usefulness of the membrane TECNOCOAT P-2049 coating alcoholic beverage containers – download
- Certificate issued by the Applus – admission to potable water – download
- Hygienic certificate for the use of the product as a lining in swimming pools – download
Technical Parameters TECNOCOAT P-2049:
- Drying time – 4 seconds
- Sensitivity to moisture – total
- The coating thickness – without protection 1,4 mm
- Abrasion Resistance – very good
- Tensile strength – Excellent
- Resistance to chemicals – Excellent
- Approval to water – YES
- Thermal Resistance – -40 ºC do +180 ºC
- Durability – Excellent
- Volatile molecules – lack
- Adhesion to the substrate – Excellent
Method of Application TECNOCOAT P-2049:
- The substrate should have the strength of 20 ~ 25 N/mm2 (HA-HA-20 ~ 25).
- The substrate must be clean, dry and free from contaminants such, how Brud, oil, smar, paint or other surface protection.
- The concrete substrate must be cleaned mechanically.
- Please fill holes and cracks.
- After completion of the repair surface should be cleaned to remove debris.
- In the case of metal surfaces, chemically cleaning is carried out using solvents.
- In many cases, you may need to prime the substrate.
- TECNOCOAT P-2049 is uniformly applied using a high-pressure.