HENSOTHERM Water is a solvent based coating systems for fire protection, which significantly prolong the increase of the temperature. As a result of temperature increase, Intumescent converted to the foam coating, which is an excellent insulator of heat flow, from the place of the fire until the steel. Before using the flame retardant system HENSOTHERM 360 KS Always remember to thoroughly protect against weathering – too low ambient, or for high humidity.
The optimum temperature, we should have steel during application is min. 3 degrees C above the dew point. Prior to application, steel should be mechanically cleaned, dedusting and degreasing, and stir the paint thoroughly, using an apparatus designed for this. The thickness of the applied coating is strongly dependent on weather conditions.
The higher the ambient temperature allows the imposition of a thicker insulating layer. By adjusting the thickness of the coating, should also be aware of the required fire resistance classification.
HENSOTHERM 360 KS can be administered by:
-
Brush,
-
shaft
-
Spray
The viscosity results, brush or roller that we once applied to 1000 g/m2 specyfiku, while using the shower to 1500 g/m2. In addition,, to immunize and protect against weather use topcoat HENSOTOP 84. Paint should be applied after complete drying of all previous coatings. HENSOTOP 84 There is also a wide range of colors.
